WORTIE® advanced wart remedy

WORTIE® advanced is particularly suitable for stubborn, resistant, mature and keratinised warts and plantar warts.

Maximised icing performance thanks to conductive gel.

Product advantages WORTIE® advanced wart remedy

• Very easy to use!
• Maximised icing performance - the conductive gel from WORTIE® advanced was specially developed for stubborn, mature, keratinised warts. By applying the gel to the skin, the cold is channelled directly to the application site for particularly effective icing down to the root. The gel allows the cold to penetrate the hard tissue. It is not necessary to soften the wart before treatment.
• Protective foam plasters - plantar warts can be very sensitive after treatment. The protective foam plasters reduce the pressure on the plantar wart and thus protect particularly sensitive areas of skin after treatment.

Application

For particularly stubborn warts, gently squeeze the tube with the gel and place a single drop of gel exactly on the wart.

Remove the cap from the can and follow the steps below:

• Place the can upright on a flat surface and hold on to the top ring of the can.
• Leave the can on the table. Turn the can cone to position "1" and press down for 3 seconds (DO NOT EXCEED 3 SECONDS). You will hear a hissing sound.
• The can cone automatically resets to "0". Wait 3 seconds (the metal tip is iced up).
• Hold the metal tip of the can exactly on the wart/keratome to freeze it.

TIP : For particularly sensitive areas (e.g. difficulty walking after treatment), a protective foam plaster can be used after icing. Carefully remove the foam plaster from the film. Stick the adhesive side of the foam plasters with the hole directly over the sensitive area.