Rosner nebuliser set Fasterjet, 1 ST

Discover the Rosner nebuliser set Fasterjet for effective and fast nebulisation of your medication. Thanks to the optimum particle size of 5 µm, the active ingredient reaches deep into the airways. Ideal for targeted treatment.

With special valve system that guarantees efficient nebulisation of the medication liquids

• Container: 16 ml
• Particle size: < 5 µm 80%
• Residual volume: 0.7 ml

Material:

• Nebuliser: made of PP (polypropylene)
• Nebuliser parts: made of PP (polypropylene)
• Mouth/nose piece: made of PP (polypropylene)

*) The PVC material used (for tubing and masks) is free from BSE/TSE (transmissible spongiform encephalopathies), free from latex, free from BPA (bisphenol A) and free from DEHP/phthalates (diethylhexyl phthalate plasticisers).

Dosage form

Set contains: Nebuliser, mouthpiece, nosepiece

How to use

Clean the nebuliser set:

• After use, carefully clean all parts of the nebuliser set, remove all medication and any dirt deposits. Handle the nebuliser and all parts (except air tubing and masks) as described below. Replace the air hose if used for other patients or if it is dirty. Clean the individual parts (with the exception of the air hose) with warm tap water (max. 60°C) for about 5 minutes, adding a small amount of cleaning agent if necessary (please follow the cleaning agent manufacturer's dosage instructions). Rinse thoroughly and drain well. The nebuliser set and all accessories (except the air hose) can also be disinfected: use commercially available chemical disinfectants that are suitable for plastics (Miltion, Amuchina, etc.) and can be obtained from any pharmacy.
• All components of the nebuliser can be disinfected in an autoclave (at 121°C and 1.1 bar for 20 minutes or at 134° for 7 minutes). After disinfection, always allow the nebuliser set and components to cool down at room temperature before use. Do not repeat the sterilisation process while the device is still warm. The manufacturer recommends replacing the nebuliser set after 100-120 cleaning processes or 20-30 sterilisations.