Acetocaustin® Stalk Wart Remover, 1 ST

The Acetocaustin® Skin Tag Remover offers a hygienic way to treat skin tags at home. It is easy to use and tailored to the specific needs of the skin.

This state-of-the-art product instantly freezes skin tags and achieves good results within 10–14 days after just one application. The innovative and patented detachable applicator allows skin tags in hard-to-reach areas to be treated with precision. Based on revolutionary Arctic freezing technology that is safe and very easy to use.

Acetocaustin Wart Remover is a medical device for the treatment of common warts.

Features

• Removes plantar warts with just one application
• No damage to the surrounding skin
• Effective removal by freezing the plantar wart
• Easy-to-use applicators
  

How it works

The Acetocaustin Skin Tag Remover freezes skin tags. The freezing process destroys the affected tissue.

Dosage form

Spray with applicator

Directions for use

1. Place the disposable protective rings with the adhesive side against the skin so that the opening is directly over the skin tag.
2. Place the applicator onto the spray can with the metal tip facing upwards and align the markings. Do not press down on the applicator until you are ready.
3. Place the spray can on a hard surface and press down on the white applicator for 5 seconds. Then leave the can to stand for 5 seconds. Take care not to touch the metal tip whilst pressing down.
4. Remove the applicator from the spray can with the metal tip facing upwards.
5. Hold the metal tip against the plantar wart for 40 seconds. Make sure the metal tip covers the plantar wart as completely as possible. Remove the protective ring after use and dispose of it. Do not reuse.
6. Wash your hands immediately after use (do not wash the treated area on your hand if used there).
7. If the product is used by more than one person, and after each use, clean the applicator with a small cloth and a little alcohol.

A pressurised container containing 50 ml (at the time of manufacture) of compressed dimethyl ether.

A special applicator for transferring the cold from the refrigerant to the plantar wart.

Ingredients

Composition: Aluminium can containing Arctic coolant (DME).