Skip to main content Skip to search Skip to main navigation
Go to homepage

Boston SIMPLUS combined solution, 120 ML

Product information "Boston SIMPLUS combined solution"

Beipackzettel ansehen

Specially developed for dimensionally stable, oxygen-permeable fluorosilicone acrylate and silicone acrylate contact lenses.

Boston® SIMPLUS™ combination solution is an innovative one-bottle solution for cleaning, disinfecting and storing dimensionally stable, oxygen-permeable contact lenses. It is approved for oxygen-permeable fluorosilicone acrylate and silicone acrylate contact lenses. Boston® SIMPLUS™ combination solution removes proteins and lipids from the lens surface and helps to prevent stubborn deposits on the contact lens. This solution is also suitable for rinsing contact lenses by removing dissolved deposits from the lens surface.

A multi-polymer system creates a liquid film, coats the contact lens when it is put on and contributes to improved, even wetting. A patented active ingredient maintains the wettability of the contact lens. This step increases wearing comfort for the eye.

The preservative system contained in the solution has been proven to combat harmful organisms. This solution has both a cleaning and disinfecting effect and is also eye-friendly when the contact lens is put on.

Contents
  • 120 ml + 1 container


Dosage form
Contact lens care solution

How to use
Remove the sealing tape. Only use the solution if the sealing tape is undamaged and present before opening forthe first time.
  1. To ensure a sufficient disinfecting effect, you must carry out all the steps described below. Wash your hands with a mild soap. (Caution! Liquid soap may contain oil-based suspending agents).
  2. Place the contact lenses in an empty storage container recommended by your practitioner and fill with fresh Boston® SIMPLUS™ combination solution. Leave the contact lenses in the solution for at least four (4) hours or overnight before putting them back on.
  3. The next morning, wash your hands thoroughly with a mild soap. Remove the contact lenses from the storage case after the soaking time . To avoid confusion, start with the right contact lens and gently rub it with two (2) to four (4) drops of Boston® SIMPLUS™ Combination Solution for twenty (20) seconds. To avoid damage, it is best to place the contact lens in the palm of your hand and gently circle the front and back surface of the contact lenswith the index finger of the other hand. A separate cleaning solution is not required.
  4. Rinse the contact lens for approximately five (5) seconds in a steady stream of Boston® SIMPLUS™ Combination Solution to remove dissolved surface deposits (note: rinsing with tap water is no longer necessary) and then put the contact lens on. Now repeat steps 3 and 4 with the left contact lens.
  5. Clean the inside of the lens storage case thoroughly with warm water after each use and then air dry the case open. Precaution: To prevent contamination, avoid any contact between the tip of the bottle and other objects. Keep the bottle tightly closed when not in use.

Ingredients
Sterile, aqueous, buffered solution, contains: Poloxamine, hydroxyalkyl phosphonate, boric acid, sodium borate , sodium chloride, hydroxypropyl methyl cellulose, glucam and as preservatives chlorhexidine gluconate (0.003%), polyaminopropyl biguanide (0.0005%).
ML: 120
Mehr lesen

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory


Warnhinweise - Boston SIMPLUS combined solution

Anwendungshinweise

Produktempfehlungen für Sie

Wir bleiben in Kontakt!