Bacillol® AF Alcohol-based rapid disinfectant, 500 ml

Bacillol® AF is a ready-to-use, alcohol-based disinfectant developed for the fast and efficient disinfection of alcohol-resistant surfaces and medical devices.

Alcohol-based rapid disinfectant for the disinfection of alcohol-resistant surfaces with comprehensive effect and residue-free drying.

Properties

• Ready-to-use disinfectant solution
• Fast and comprehensive effect
• Broad material compatibility with alcohol-resistant surfaces
• Residue-free drying
• Aldehyde, colourant and perfume-free Good wetting properties
• Required spectrum of activity SARS-CoV-2: limited virucidal

All HARTMANN disinfectants for hands, skin, surfaces and instruments fulfil the efficacy requirements for limited virucidal activity and can be used.

Dosage form

Disinfectant solution

Application

• Bacillol® AF is suitable for the rapid disinfection of alcohol-resistant surfaces using the spray/wipe method, where not only a rapid effect but also residue-free drying is required.
• Bacillol® AF is applied directly to the surface so that it is sufficiently wetted. Then spread the product with a cloth and keep the surface moist for the entire application time.
• Not suitable for acrylic glass (PMMA) and alcohol-sensitive paints. For sensitive surfaces, carry out a resistance test on an inconspicuous area.
• Hazard warnings: Danger: Flammable liquid and vapour. Causes serious eye damage. May cause drowsiness and dizziness. Reactivity: No decomposition if stored and used as directed. The product is chemically stable. Hazardous reactions: No hazardous reactions known if handled as directed. Substances to avoid: None, Conditions to avoid: Heat. Prolonged exposure to strong sunlight. No decomposition if stored and used as directed.
• Advice: Not for the disinfection of invasive medical devices. The amount of working solution applied must not exceed 50 ml per m2 of surface to be treated. The total quantity applied per room must not exceed 100 ml per m2 of room floor area. Disinfection may only be started if there are no flammable vapours or gases (e.g. petrol, ether) in the room. If the electrical system cannot be completely de-energised, it must be ensured that no switching operations, especially automatic ones, can occur. Do not allow any disinfectant solution to enter the interior of electrical appliances. Hot surfaces must be sufficiently cooled down. During application, the ventilation system (air conditioning) must be kept in operation or other ventilation must be provided. Do not allow undiluted product to enter waterways. Always read the label and product information before use.

Ingredients

Composition: Active ingredients: propan-1-ol 450 mg/g; propan-2-ol 250 mg/g; ethanol 47 mg/g.